Polycarbonate End Closure Roof Sheet U-Profile Roofing End Trim (16mm, Anthracite Grey)

Description

END CLOSURE FOR POLYCARBONATE SHEETS (2.1m LONG)(Choice of thickness and colour)Seal and protect the ends of your polycarbonate sheetsAlso known as "U" Drips, Poly End Covers and End Profile Trims, these End Closures are designed to protect ends and form a tight seal to the top of polycarbonate sheeting.End closures are typically fitted to the gutter-end of pitched roofs, such as those of a conservatory, or to both ends of a free-standing roof. Provide decorative protection to the vulnerable ends of polycarbonate sheeting.Features & BenefitsSeals open end of polycarbonate sheetHelps prevent dust and insects entering the sheetProtects vented anti-dust breather tapeDrip design prevents water from being blown back towards the roofDrainage holes reduce condensation and moistureExtend the life of your roofWith three sides protected by glazing bars and ridge capings, the gutter end is often the only edge of polycarbonate sheets that are exposed. When left exposed, the breather tape that is applied to the open fluted ends of the sheets become wet and deteriate. This leads to failure of the tape and the sheets flutes suffering condensation, algae build-up and insect penetration. Fitting End Closures helps stop this from happening.These End Closures are designed with a small 'drip' on the front edge, to stop water running back towards the roofing material.Technical InformationFinishes: White or Chocolate BrownMaterial: PVC-uGlazing Thickness: 10mm, 16mm, 25mm or 35mmLength: 2.1m