Flow Switch, Grid Controls 1" with Two Cords, M310 10A Flow Switch, Chemical dosing Control, for Pump-57-F4-3100-112

Description

To use with chemical dosing pump or water heater/ UV Purifier without any wiring hassle. Just plug in to wall adapter and connect your chemical dosing pump to the cable with receptacle. The flow switch has a 10A micro switch that provides closed contact when there is a water flow and open contact when there is no water flow. The micro switch is pre wired to remove any wiring need. The flow switch provides 7.5’ power cord with NEMA 5-15 plug for power and 7.5’ cable with NEMA 5-16 receptacle to connect your load. All UL rated components are used in construction. The receptacle turns ON/OFF with the micro switch and can be used for single phase chemical dosing pump. Micro Switch Rating: 10A Maximum Voltage: 230V Single Phase Turn On at and above 1.1 GPM flow. Turn off at and below 0.5 GPM flow. 1" PVC Inlet and outlet socket connections, Glue type, insert 1" pipe into the flow switch and glue it. Wetted Surfaces - PVC, Polypropylene, Buna N Line Pressure: 90 PSI Temperature: Up to 110 deg F Underwriters Laboratories recognized. 10A micro switch pre wired with 7.5’ 14/3 AWG outdoor rated cable for high current. The item may come with black or coloered wire, depending on what cables are in stock. All wires rated same and are 14gauge wires. Note: 1. Adding flow switch in the line will add pressure drop and restrict the water flow. You can expect 10-15 GPM maximum water flow through our 1" flow switch depending on your water pressure. 2. Installation and troubleshooting instructions are available on our website.