🚀 We’re in Beta!
Meet our new design. Everything works as usual, but if anything feels off, give us a ping.
The Connector Inspection Tool is a tool for testing electrical connectors in a wide range of industrial equipment. It can be used to determine the retention force of the terminals in the connector in a variety of circumstances to determine if normal operation is possible. The retention tester can also be used in other scenarios as a disassembly tool to separate terminals from connectors. Electrical system tools can be used in a variety of industries such as electronics, automotive, aerospace, medical equipment, etc. . They are also widely used in MIL connectors,（such as MIL-DTL-38999, MIL-DTL-26482, Mil-C-81659）Deutsch connectors, Harting connectors, it ensures the reliability and efficiency of electrical connectors, improves production efficiency, reduces failure rates and reduces maintenance costs. 1. Each tool was adjusted at a specific force in factory and could be re-adjusted by customer if necessary 2. Remove hand protector, loose lock nut（open-ended spanner 5/16） to allow free movement of adjustment screw 3. Put tool in tensile equipment for precise calibration If precise calibration isn't required or cant find proper a tensile equipment, you can set the tool by hand 4. Holding the tool firmly by hand on a weight indicating device, and apply axial force with a specific weight. Tool must be in a axial line with weight indicating device, and slide should pass over the indicator line 5. Adjust tool to required force by turning adjustment screw with a screwdriver Clockwise to increase and counter-clock wise to decrease, and slide should be pull back. When required value is achieved, slide should be aligns with indicator line. Hold tool in position and tighten lock nut firmly Tool is now set 6. Inspection stickers should be used to seal hand protector onto tool body, in order to avoid any unintentional touch with the adjustment screw
Trustpilot
1 month ago
2 months ago