TERASIC TECHNOLOGIES P0037 DEV BRD, ALTERA DE0 BOARD

Description

The DE0 package includes: Altera DE0 Board USB Cable DE0 CD including ： Altera's Quartus II Subscription & Web Edition and the Nios II Embedded Design Suit Evaluation Edition software DE0 User Manual, Quick Start Guide DE0 Acrylic Adapter DC 7.5V/0.8A (US wall plug) FPGA Cyclone III 3C16 FPGA 15,408 LEs 56 M9K Embedded Memory Blocks 504K total RAM bits 56 embedded multipliers 4 PLLs 346 user I/O pins FineLine BGA 484-pin package Memory SDRAM One 8-Mbyte Single Data Rate Synchronous Dynamic RAM memory chip Flash memory 4-Mbyte NOR Flash memory Support Byte (8-bits)/Word (16-bits) mode SD card socket Provides both SPI and SD 1-bit mode SD Card access Interface Built-in USB Blaster circuit On-board USB Blaster for programming Using the Altera EPM240 CPLD Altera Serial Configuration device Altera EPCS4 serial EEPROM chip Pushbutton switches 3 pushbutton switches Slide switches 10 Slide switches General User Interfaces 10 Green color LEDs 4 seven-segment displays 16x2 LCD Interface (Not include LCD module) Clock inputs 50-MHz oscillator VGA output Uses a 4-bit resistor-network DAC With 15-pin high-density D-sub connector Supports up to 1280x1024 at 60-Hz refresh rate Serial ports One RS-232 port (Without DB-9 serial connector) One PS/2 port (Can be used through a PS/2 Y Cable to allow you to connect a keyboard and mouse to one port) Two 40-pin expansion headers 72 Cyclone III 3.3V I/O pins, as well as 8 power and ground lines, are brought out to two 40-pin expansion connectors 40-pin header is designed to accept a standard 40-pin ribbon cable used for IDE hard drives. Board size: 99.7 X 128.02 mm