Ferro-bet Ferro-Guard Anti-rust coating Clear

Description

Product description Ferro-Guard represents a new generation long-acting and environmentally friendly 1-component anti-rust coating designed for harsh salt-exposed industrial and marine environments (C4 and C5). An eco-friendly waterbased coating with over 15 years life expentancy in coastal C4 environment. Very good adhesion to steel, stainless steel, galvanized steel, zink, aluminium, old painted surfaces and most plastics. Ferro-Guard high performance coating is formulated with a mix of a new generation acrylic resins and innovative anti-rust additives. Low VOC content. Very easy and timesaving application. St2 preperation – no sandblasting required. Single coating system, only ONE product to handle – primer and top-coat in one. Extremely fast drying time. Provides long-term protection with less work and thinner film than classic anti-rust solutions. A film of 200 µm (0.2mm), min. 2 coats (incl. Primer), will prevent steel from rusting even in harsh industrial and marine environments C5i / C5m are the most severe corrosion classes (ISO 12944) Available in Pure White, Jet Black and Clear colours Legal Disclaimer INSTRUCTIONS FOR USE: 1.Pretreatment - The surface should be clean and dry a.Remove grease, oil, rust, loose paint and the like b.Brush away any loose rust - Normally, high pressure washing (300 bar) will suffice When painting on plastic such as hard PVC, ABS, Polycarbonate etc, sand down the surface with sandpaper 2.Application equipment: Short-haired paint brush, roller or airless spray-gun 3.Application: Temperature >5°C, humidity max. 80% a.Stir before and during application b.Can be used as primer only,1 coat c.Primer and top coat, 2 coats d.Previously painted surfaces that need aesthetic renewal need only 1 coat e.Weathered galvanized steel also need only 1 coat 4.Drying time 1-2 hours, recoatable after 4 hours