AODUKE All Aluminum Alloy 5Bay M.2 SATA SSD to USB3.0 Adapter Clone Docking Station,External Hard Drive Enclosure for M&B Key NGFF SSD, Support Offline Clone Data backup-AJM2SC5L

Description

Product_description 5Ports M.2 SATA protocol SSD offline hard disk copier Support M.2 SATA(NGFF) SSD(M.2 nvme SSD is not supported) 1. Clone Mode: 1: 4 mode cloning M.2 SATA SSD A to M.2 SATA SSD B/C/D/E, 2. Read-write mode: Connecting the computer can read and write four M.2 SATA SSD at the same time. Product parameters Transmission interface: Type-C Transmission bandwidth: 6Gbps Support equipment: M.2 SATA NGFF SSD(B&M-Key) Power supply: 12V/3A Product weight: 435g Product size: 146X120X28MM Material: ABS One-touch offline clone 1. Insert Source Disk into hard drive bay SSD A, then insert Target Disk into SSD B/C/D/E. 2. Push the PC / CLONE switch on the back of the hard drive to the CLONE side. 3. Connect power supply and press the POWER switch. 4. Long press the clone key for 5 seconds+Briefly press the clone key for 1 second. 5. A Blue LED will flash on 20% indicating that the cloning process has begun. 6. The cloning process is complete when ALL the lights turn solid Blue (20%-100%). What’s in the box 1 x 5bay docking station 1 x Power supply 1 x USB3.0 cable 1 x TYPEC TO USB3.0 1 x User manual please note: 1. Clone Do not connect to the computer during use. 2. It is also not compatible with MacBook original SSD. 3. If there is a bad sector in the SSD, copying may stop. Scan the SSD once before copying to make sure there are no bad sectors. 4.Make sure that the SSD disks can be recognized on the computer when plug in our SSD enclosure.If not, it could not clone. 5. After installed, when the first time to use the new SSD, it may not be found, please partition and format it first under disk management, then it can be used normally. If want to work on bot