Graphene Coating Kit 1 x graphene ceramic coating, 1 x applicator, 1 x wiping towel, 1 x microfiber clothes, 1 x protective gloves, 1 x manual. 10H Hardness Compared with other 9H coating, this updated version coating hardness increases to 10H so that it lasts longer and works better on protecting your car paint.Graphene Ceramic Coating Graphene allows for increased slickness, depth, durability and does not retain heat. Graphene has a very high water contact angle and lower sliding angle. This means any moisture in any amount will slide off much easier to minimize the risk of any water evaporating on the surface and causing water spots. HOW TO USE IT: Prepare Before Ceramic Coating: 1.Wash the car.(Not only need to wash the car but also remove the stubborn stains, tires, dirt, iron stasis and cleaning the gap between the vehicle body and the glass by Physical Decontamination, by the way, cleaning the wheel. ) 2.After washing the car, Is topolish the scratches and paint. 3.Keep the vehicle surface is completely clean and dry. Applying The Ceramic Coating: 1.Wrap one small suede tightly around the sponge.Shake the bottle then apply several drops to the cloth. 2.Smear the coating solution on the whole car body vertically and horizontally.Continue to spread same as last step,small area by small area until coating covers the whole car body.( Do not use excessive dosage, That can result in uneven smearing of the solution or cracks. ) 3.After the waiting period passes about 1-5 minute, use a towel to wipe and polish the coating. This will allow the coating to form a highly glossy finish. The Curing Process: Let the car stay indoors or in your garage for a day. (If you need to apply more layers, the interval to each layer must be more than 1 hour.) Note: 1.Make sure the surface is clean, dry and scratch free before applying the product. 2.Please do not touch your coated car within 24 hours if not dry. And also Don't Wash/ water /raining/wet your coated car within the first 7 days . 3.Do not use excessive dosage, That can result in uneven smearing of the solution or cracks. 4.If you need to apply more layers, the interval to each layer must be more than 1 hour.
Trustpilot
1 week ago
5 days ago