Gorilla Clear Grip Contact Glue 5 gram Mini Tubes, 4 Count

Description

Gorilla Clear Grip is a flexible, fast-setting, crystal clear contact adhesive that creates a strong, permanent bond. Gorilla Clear Grip is paintable and waterproof making it great for projects both inside and out! Build, create, repair! Not for use on food contact surfaces. Permanent Bond Crystal Clear Fast Grab- Holds in Just Seconds 100% Waterproof - for indoor/outdoor No-Run Formula Paintable Flexible Heavy duty Photo Safe Washer & Dryer Safe Paintable - Yes - Can be painted with water and oil-based paints, spray paint Sandable  - Yes Stainable - Yes APPLICATION TEMPERATURE – 50° to 90° F, best at room temperature BONDS: Metal, Glass, Fabric, Wood, Ceramic, Leather, Paper, Plastic, and More! Directions for Use: All surfaces should be clean and free of dirt, grease, and oil. Best if used between 50°F and 90°F. Clear Grip should only be used in a well-ventilated area Apply adhesive to each surface to be bonded: To maximize bond strength: Wait approximately two minutes for adhesive to partially dry before joining surfaces Press surfaces firmly together. NOTE: Bond forms immediately and can be difficult to reposition Cure Time: Allow for a minimum of 24 hours for full cure. Cure time may increase with lower temperatures and when used on non-porous surfaces Storage Tips: After each use, wipe the nozzle with a dry cloth and tightly replace the cap. Store in a cool, dry location. Tip: For easier re-opening, apply a thin coat of petroleum jelly to the threads before replacing the cap. Store away from children and animals Clean-up: Wipe uncured adhesive with a dry cloth and clean with acetone, isopropyl alcohol, or citrus-based solvents according to manufacturer’s instructions. Cured adhesive may be removed by scraping from the surface Not recommended for use on polystyrene, polypropylene, or polyethylene products Do not dry clean. May cause damage to finished surfaces