"Instructions1.Remove the tip need to be replaced.Cut between ferrule and tip,press and rotate the cue,then tip shall be removed.2.If the tip wasn’t cleanly removed,please use the cue repairing kit blade to remove the residual.3.Now you shall find there are some residual of glue at ferrule,that’s OK,we put it into the diameter control loop,left a little gap for cue to be able rotate.Note:anti-clock wise rotate.With small card slot,the device can be used on repairing cue diameter from 9.3mm to 13.2mm.4.Small slot,the device can be used to repair the snooker cue.5.If you are using an enclosed ferrule,you need to use thread needle to remove glue from the crack part,then apply new glue.6.Grab the new tip,use the sandpaper to burnish the adhesive surface,make it flat for glue.7.If the tip you are using id hardness “H” or harder,you can choose to cut the arc first.Note:clockwise rotate,this will reduce the resistance when you remove the extra diameter in the next step,also help to improve the durability of the blade.8.Now,use the same kit hole,just change the angle of the cue,parallel the taper hole and cue,clockwise rotate,this process will remove extra diameter of the tip.9.File the arc just made,making it look more uniform.Note:from top to bottom file.10.Cue repair kit provides 2 radians alignment,you an choose the radian of you need,if there is a gap that means arc is not uniform,need further burnish.Finished,now apply chalk and enjoy the match.11.At here there is a needle cluster,during using,tip is easily harden due to regular stricken,apply the needle cluster on the tip will create tinny holes,make it easily powdering,knock the tip with it several time.12.At last,this groove is used for burnish the tip,in the case of during using tip is just too smooth but arc was not changing, it will help to gain friction,just stand cue 90 degree up and rotate
Trustpilot
2 weeks ago
3 weeks ago