Sikaflex-146 Wood is a special soft putty-glue wood, it allows you to attach wooden elements such as skirting boards, panels, baguette, champlat, angle, finishing profile, molding and counter-step steps and make vertical and horizontal joints around the glued elements. It can be used on concrete, masonry, stones, vitrified tile, metal, glass, rigid PVC, raw wood, OSB or chipboard. Technical information: Application temperature: +5°C to +40°C. Curing speed: about 3 mm/24 h. Skin formation time: about 35min. Consumption: a cartridge of 290 ml makes it possible to make about 15 m of cord. Application method: Apply on clean, dry support free of dirt, oil, grease, cement milt. After the necessary preparation of the supports, open the end of the cartridge before or after insertion into the putty gun and then screw the nozzle. Apply in cords, strips or studs several centimeters apart. Use only manual pressure to place the elements to be glued to the appropriate position before the sealant forms a skin. Improperly positioned elements can be easily repositioned for the first few minutes after application. Press again. If necessary, use temporary adhesive strips, wedges or accessories for holding the assembled elements during polymerization. Fresh, unpolymerized putty-glue persisting on the surface should be removed immediately. The final strength will be obtained after the complete polymerization of Sikaflex-146 Wood, that is, after 24 to 48 hours at +23 ° C, depending on the climatic conditions and the thickness of the putty-glue layer.
Trustpilot
1 month ago
1 month ago