Deco ColorDECORATION_MATT UNIVERSAL SPRAY PAINT MULTI-PURPOSE SATIN MATT FINISH ART CRAFT ART DECOR DIY (RAL 4005 Violet_matt)

Description

Notice: For surfaces made of PUR, PS, PA, EPDM, ABS, GfK, Hart – PCV use Plastic Primer DECO COLOR previously. Best result when applied at 10-25°C. Satin-matt finish of painted surface Perfect covering Short drying time: 10-15 min Touch dry: 30-40 min; Hardened: 24 h Efficiency 1,5-2 m² depending on colour and type of surface by one application High resistance to abrasion and weather conditions Variety of colours: 20 most popular colours in RAL system For indoor and outdoor use Capacity 400 ml For better adhesion, to improve covering and to increase resistance of painted surface we advise you to use our Anticorrosive Primer previously. (Available in 4 colours for suitable background) To protect painted surface in best way we recommend to apply RAL 0000 Transparent as a top coat. In such way you can achieve best result! Usage: Before applying read carefully instructions on the container and use according to the manufacturer’s recommendations. Recommended substrate conditions: Preparing the substrate is very important action influencing the quality and life of varnish coating. Fundamental principle, which relate to all surfaces prepared to painting is to grind, degrease and dry out. After drying the primed surface should be grinded with fine-grained abrasive paper (e.g. P600). Method of usage: Apply product at temperature about 10-25°C (optimum temperature for good varnish drying). Drying time depends also on air humidity and product density. Painting should be made in well ventilated room. Prior to commencing painting, shake the container for about one minute, which will help mix the varnish by the ball found inside. Perform the test spray. Apply the varnish with few thin layers rather than one thick layer, from the distance of 25-30 centimetres. Following applying each layer, wait a few minutes. Following the completion, clean the nozzle. Put the container upside down, pressing the nozzle for the period of three seconds.