Finest-Filters Reverse Osmosis RO Unit with Booster Pump and DI Stage Pumped 50-100gpd (100gpd)

Description

The Finest-Filters 4 stage RO unit with booster pump is ideal for ultra pure water production in a range of applications, and especially in situations where the water pressure is too low for effective water production rate from an un-pumped system. This is a very advanced RO unit, with a built in booster pump, automatic membrane back flush, pressure gauge, high pressure and low pressure switch. The built in booster pump ensures the optimal water pressure is supplied into the RO unit for the best rejection rate and water production speed, saving both time and water. The automatic flush unit will operate periodically and back flush the RO membrane. This will prolong the life of the filters, and eliminates the need to manually back flush the membrane. The built in pressure gauge displays the water pressure (psi) to give piece of mind that the RO unit is working at the optimal water pressure. This unit is available in three different sizes (50gpd, 75gpd and 100gpd). gpd = gallons of product water (approx) produced per day. Please select the required model from the drop down box above when ordering. The physical size of the units is the same, just the membranes are rated at different capacities. These 4 stage units have a DI chamber, which is supplied filled with high quality DI Resin. After passing through the membrane, the filtered water is passed through the DI resin, to reduce the Total Dissolved Solids to 0. This is a 4 stage RO unit, which will produce 0 TDS water. Please note: The booster pump fitted to the unit is not rated for continuous use. The pump can run for a maximum of 2 hours then would need to rest for 15 to 30 mins. If you need to run the unit for long periods it is best to use a plug-in timer to turn the pump on and off as required. If you require further information regarding this, please contact us.