DiLiBee 3.5PS 2-stroke boat engine outboard outboard engine petrol engines CDI system DE

Description

Note: Please add gear oil to the gear wheels before using the engine and replace gear oil after the inlet time (10 hours). (If you do not know how to handle it, please contact us) Total length: 92 cm. Total width: 36.5 cm. Total height: 22 cm. Transom height: 42 cm Full gas throttle range: 4000-5000r / min Maximum power: 2.5 kW (3.5 HP) Speed: 10 km / h Type: 2-stroke Ignition system: CDI system. Start-up system: manual start Starter carburettor system: choke start. Propeller marking: 7-1/45-A (inches). The motor and the propeller ratio: 2: 1. Recommended fuel: regular unleaded petrol. Fuel oil ratio: 30:1 Gear ratio: 27/13 Wiped, 13 kg. If on a normal cruise the appearance of the Senveth picture. The boat falls back, the appearance of the outboard motor likes the eighth picture. When you get the boat back, you should drive slowly, otherwise the boat will not be stable. The outboard motor back can rotate 360°. Only in easier, let the engine turn 180 and the operation handle face back, the boat can fall back. Notes: After sea water or cloudy water cruise: Use the fresh water that cleans the outboard motor. 2. With the moderate speed that circulates the engine, cool the water channel with fresh water. Before fully leaking cooling water, not the outboard motor. Otherwise, the water channel passes through the exhaust opening to enter the air cylinder. This causes the engine failure. 4. The engine should be in the dryness and ventilated place to avoid exposure directly in the sun. Before long-term storage, you should run out of the petrol into the fuel tank.